Precast panel and hollow core slab cutting demands stiff cores and laser welded segments for safe deep cuts.
Precast concrete plants and construction sites cut panels, hollow core slabs, and wall elements to length on a daily basis. These cuts pass through dense concrete, prestressing strand, and embedded hardware. Protec Tools laser welded blades provide the segment retention security required when cutting through unpredictable reinforcement at depth.
Blade Requirements
- Laser welded segments for retention during deep cuts through strand and wire mesh.
- Stiff steel core to maintain kerf straightness on long panel cuts.
- Medium to hard bond matched to concrete compressive strength.
Cutting Protocol
- Mark cut lines and verify no critical prestressing strand path conflicts.
- Cut wet with continuous water flow to control silica dust.
- Use walk-behind or wall saws rated for panel thickness and blade diameter.
- Inspect blade after cutting through each embedded steel element.
Protec Tools supplies precast-rated blades with documented segment retention test data.
Related Protec Tools products: Laser welded diamond blade, Sintered diamond blade, Diamond core drill bit, Diamond grinding wheel
