diamond cutter tools have been listed as agents for various backpacks, bags, binding, carving, smelting, and sales in previous exhibitions. Customization can be made according to customer requirements.
Diamond tools manufacturing process classification 1. Sintered diamond saw blades: divided into two types: cold press sintering and hot press sintering, which are formed by pressing and sintering. 2. Welding diamond saw blades: There are two types of welding: high-frequency welding and laser welding. High frequency welding uses a high-temperature molten medium to weld the blade and the substrate together, while laser welding uses a high-temperature laser beam to melt the contact edge between the blade and the substrate, forming a metallurgical bond. 3. Electroplated diamond saw blade: It is the process of attaching the blade powder to the substrate through electroplating. Appearance classification 1. Continuous edge saw blade: Continuous serrated diamond saw blade, usually made by sintering method, commonly used as the basic matrix material with bronze binder. When cutting, water must be added to ensure the cutting effect, and laser is used to cut the gap type of the blade. 2. Blade type saw blade: serrated, fast cutting speed, suitable for both dry and wet cutting methods. 3. Turbine type saw blade: Combining the advantages of the first and second items, the serrations continuously present a turbine like uniform convex and concave shape, improving cutting speed and increasing service life. Different types of diamond saw blades are selected for different materials, and different powder formulations are suitable for the characteristics of different materials, which directly affect the quality, effectiveness, qualification rate, and even cost and benefit of material products. The main factors affecting cutting performance include saw blade linear speed, cutting depth, saw blade diameter, width, and same side length.
If the saw blade is not used immediately, it should be placed flat or suspended using the inner hole. Other objects or feet should not be stacked on the flat saw blade, and attention should be paid to moisture prevention.
When the saw blade is no longer sharp and the cutting surface is rough, it must be promptly re polished. Grinding cannot change the original angle or disrupt dynamic balance.
The inner diameter correction and positioning hole processing of the saw blade must be carried out by the manufacturer. If the processing is poor, it will affect the effectiveness of the product and may cause danger. In principle, the hole expansion should not exceed the original aperture by 20mm to avoid affecting the stress balance< eod>。
