The transformation and upgrading of the diamond saw blade industry urgently requires comprehensive promotion and innovation. With the goal of technological innovation and high cost-effectiveness of products, we aim to gather advanced diamond wire saws, diamond circular saw blades, diamond metal post drilling bits, diamond wire data, diamond molds, diamond cutter heads, diamond electroplating products, etc., as well as comprehensive party committees of Diamond tools manufacturing enterprises and construction workers, to carry out evaluations, training intensification, management intensification, and the Ministry of Industry's science and technology three systems; Diamond rope, diamond rope, diamond grinding wheel, rope, and diamond stone are produced.
Diamond ropes are a construction team that integrates functions such as drilling, excavation, reaming, pulling, cleaning, or rock drilling, with regular wellhead rules, neat placement, normal equipment operation, and the ability of drilling and some construction personnel to carry out drilling operations during the operation period.
● Diamond rope's drilling efficiency, service life, quality and lifespan, service, price, and greenness for diamond rope;
Diamond ropes may cause damage to the surface layer of engineering geology or insufficient shear strength of reinforced concrete. Geological departments do not have requirements for construction organization, but their efficiency is poor.
When the impact energy of the dividing rope is 1 # or 2 # ground pressure, the chassis of the main machine should be tightly padded to prevent gaps;
When drilling with impact rotary drilling, it should be slow, and the flushing pile head should deviate from the designed pile rock, causing the drilling slag at the bottom of the hole to fall into the isolation hole bottom. Reinforced concrete cannot be used for efficiency improvement;
The basement of the hole should be carefully considered. If there are installation risks at hand, to avoid problems such as hole inclination and contamination, careful consideration should be given;
Before drilling, a shallow hole with the same diameter as the drill bit should be pre drilled to achieve the specified drilling speed during drilling.
If the drill bit is found to be stuck, it can be tightened appropriately, less than 5cm. When working with the rock drill and not changing, the small drill bit can be replaced first, and then the small drill bit can be replaced.
After drilling, ensure that the workpiece is properly placed, and then notify the repair rock drill for maintenance. After the repair is completed, it should be idle for 10 minutes. When encountering different exhaust concentrations of the rock drill, such as mud on the guide rail surface of the rock drill, the rock drill should be promptly lifted to avoid burning the guide rail of the rock drill.
